American Car Craft Corvette Tag Frame Laser Mesh Polished 2005-2013 C6 all - Manual (Page 2)

then apply the graphic using your thumb to iron the black vinyl to the paint at both
locations. Then simply install the frame. This is the most simple and straight forward way
to install these graphic inserts however if you find this method be a little tricky for you
then try this:
Apply these back drops wet. This will allow you to slide the inserts around to the best
position and then squeegee out the fluid to set the graphic. To do this mix a 32oz spray
bottle of water with a few drops of Johnson’s Baby Shampoo. Spray the solution to the
paint and make sure the mixture sheets the paint and does not bead up. Once you have
achieved a good solution simply spray the car as well as the graphic and slip the insert
into position then squeegee it to set in place.
If you have and questions during installation, please call American Car Craft at
727.861.1500.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com