American Car Craft Corvette Fender Caps Polished Illuminated 2005-2013 C6+GS - Manual (Page 2)

With this in mind simply fold over a small section of the red release liner from the
underside of the cap cover and set in place. Holding the cover tightly in position
pull the red liner off the attachment tape as you firmly press the cap cover to set.
#1 #2
#3
Installation procedure for the Lighted Version: This part of the installation is relatively
easy but will take a little more time ….
1. The first step will be to create a 12v source for your new cover. This will require
you to choose a good location for a switch. We recommend putting it in an easy
location by the battery. This will make it very easy to use the switch and tap the
batteries positive and negative posts to supply your new cover with a reliable
power source. (The switch, and wire for this are not included.)