Assembly – BabyTrend PY86045 - DELUXE NURSERY CENTER - SKYLAR User Manual

Page 7

ASSEMBLY

2. Open Canopy completely and feel the top

center of the Canopy to ensure that the straps

are aligned correctly so the Canopy fits on the

Playard. (Fig 25.)

3. Position Canopy in the center of Playard.
4. Attach each side of Canopy by firmly

pressing Canopy clips onto the center of the

top rails as close to the center as possible.

(Fig. 26)

5. Attach the other end of the Canopy to the

Playard by snapping the two (2) buttons

or velcro located near each corner of the

Playard. (Fig. 27)

NOTE: Your canopy comes with plush toys if

your unit does not include a mobile.

TO REMOVE CANOPY

Unsnap the Canopy and pull upward on the ends

of the Canopy from the side of the Playard.

Fig. 26

Fig. 27

Contents:

(a) 1 Wind Up Mobile

(b) 1 Mobile Tri-shaped Arm (toys may vary)

1. Attach the Mobile (a) to the Tri-shaped Arm

(b) align slots on both pieces then gently press

the two pieces together. (Fig. 28).

2. Attach the Mobile to Canopy using the

Velcro and connecting the straps together

through the hole in the top of the Mobile

housing (Fig. 29).

Fig. 28

(a)

(b)

Fig. 29

(a)

(b)

ASSEMBLY

Fig. 25

MOBILE ASSEMBLY (Wind Up or Fixed)

ATTENTION:

DO NOT

attach Mobile to Canopy until Canopy is correctly installed as noted in the

Canopy instructions.

A crib mobile is intened for visual stimulation and is not intended to be grasped by

the child.

If attached to the crib or playpen, remove when baby begins to push up on hands and

knees. If so designed, mount on wall or ceiling clearly out of a standing baby's reach.

Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or

playpen according to the instructions. Check frequently.

DO NOT add additional strings and straps to attach to a crib or playpen.

DO NOT

attach the Mobile with child in Playard or Bassinet.

DO NOT

remove the Mobile before retracting the Canopy or removing the Canopy.

Wind Up Mobile