BabyTrend RH30000 - RAIN COVER FOR SINGLE JOGGER - Manual

WARNING: THIS RAIN COVER IS
NOT A TOY. TO AVOID DANGER OF
SUFFOCATION, KEEP THIS RAIN
COVER AWAY FROM BABIES AND
CHILDREN. DO NOT USE IN CRIBS,
BEDS, CARRIAGES, OR PLAYPENS.
NEVER leave this cover in place with child in stroller
when exposed to direct sun or high temperature, as
temperature inside may become excessive.
HOW TO USE INCLUDED RAIN COVER
1. Remove rain cover from box.
2. Unfold rain cover.
3. Place rain cover on jogger. Orientation
should be with velcro strips by the front swivel
jogging wheel. Feed the back panel under the
parent tray and attach the velcro tabs on the
back panel to the velcro tabs on the rain cover.
(see Fig.1)
4. Attach velcro strips around metal tubing of
jogger behind the fender. (See Fig. 2)
CARE AND MAINTENANCE
Rain cover is NOT washable.
Wipe with cloth. Hang dry.
Do not machine was or dry.
Do not fold or put rain cover into storage while
wet. This could cause the rain cover to mold.
Rain cover instructions
NEVER leave child unattended at any time.
For use only on Baby Trend model jogging strollers.
Do not use bleach.
5. Clip plastic tabs of the rain cover on the
fender of the jogger. Note: Certain models have
different frame sizes and all plastic tabs may
not be able to attach. If you have such a model,
attach the forward-most tab only. (Fig. 3)
Fig. 3
Fig. 1
Fig. 2