Pin description – Rainbow Electronics MAX1200 User Manual
Page 7
MAX1200
+5V Single-Supply, 1Msps, 16-Bit
Self-Calibrating ADC
_______________________________________________________________________________________
7
Pin Description
12
18
17, 28, 29
16
1
PIN
15
8
7
3, 6
2, 4, 5
11
10
9
14
NAME
20
FUNCTION
19
13
D11
Bit 11
D7
Bit 7
DGND
Digital Ground
DRV
DD
Digital Power Supply for the Output Drivers. +3V to +5.25V, DRV
DD
≤
DV
DD
D8
Bit 8
D9
ST_CAL
Digital Input to Start Calibration.
ST_CAL = 0: Normal conversion mode.
ST_CAL = 1: Start self-calibration.
Bit 9
D5
Bit 5
D6
Bit 6
D10
D15
Bit 15 (MSB)
Bit 10
DOR
Data Out-of-Range Bit
AV
DD
Analog Power Supply, +5V ±5%
AGND
Analog Ground
D12
Bit 12
D13
Bit 13
D14
Bit 14
21
23
22
D4
Bit 4
D2
Bit 2
D3
Bit 3
24
26
25
D1
Bit 1
TEST1
Test Pin 1.
Do not connect.
D0
Bit 0 (LSB)
27, 30
32
31
DV
DD
Digital Power Supply, +3V to +5.25V
DAV
Data Valid Clock. This clock can be used to transfer the data to a memory or any other data
acquisition system.
CLK
Input Clock. Receives power from AV
DD
to reduce jitter.
33
35
34
OE
Output Enable. OE = 0: D0–D15 and DOR are high impedance. OE = 1: All bits are active.
CM
Common-Mode Voltage. Analog Input. Drive midway between positive and negative reference
voltages.
TEST0
Test Pin 0.
Do not connect.
36
38
37
RFPF
Positive Reference Voltage, Force Input
RFNF
Negative Reference Voltage, Force Input
RFPS
Positive Reference Voltage, Sense Input
39
41, 42
40
RFNS
Negative Reference Voltage, Sense Input
N.C.
Not Connected. No internal connection.
INP
Positive Input Voltage
43
44
INN
Negative Input Voltage
END_CAL
Digital Output for End of Calibration.
END_CAL = 0: Calibration in progress.
END_CAL = 1: Normal conversion mode.