Rainbow Electronics MAX534 - Manual (Page 6)

MAX534
6 _______________________________________________________________________________________
______________________________________________________________Pin Description
PIN
DAC B Voltage Output OUTB 1
FUNCTION NAME
DAC A Voltage Output OUTA 2
Software-Programmable Logic Output UPO 4
Reference-Voltage Input REF 3
Load DAC Input (active low). Driving this asynchronous input low (level sensitive) transfers the contents
of each input latch to its respective DAC latch.
LDAC 6
Serial Data Output. Sinks and sources current. Data at DOUT can be clocked out on the rising or falling
edge of SCLK (Table 1).
DOUT 8
Clear DAC Input (active low). Driving CLR low asynchronously clears the input and DAC registers, and
sets all DAC outputs to zero.
CLR 7
Power-Down Enable. Must be high to allow software shutdown mode. PDE 5
Serial Clock Input. Data is clocked in on the rising edge and clocked out on the falling (default) or rising
edge (A0 = A1 = 1, see Table 1).
SCLK 10
Digital Ground DGND 12
Serial Data Input. Data is clocked in on the rising edge of SCLK. DIN 11
Analog Ground AGND 14
DAC C Voltage Output OUTC 16
DAC D Voltage Output OUTD 15
Power Supply, +4.5V to +5.5V V DD 13
Chip-Select Input (active low). Data is shifted in and out when CS is low. Programming commands are
executed when CS returns high.
CS 9
+5V, Low-Power, 8-Bit Quad DAC
with Rail-to-Rail Output Buffers