Rainbow Electronics GC864-PY User Manual

Page 8

Telit GE864 and GC864 Product Description

80273ST10008a Rev. 14 - 18/09/08

page 8 of 62

• JAMMING DETECT & REPORT (detect the presence of disturbing devices)

• CMUX

• SAP (SIM Access Profile)

• Multisocket

From the interface point of view, the

GE864

and

GC864

provide the following:

• Full RS232 UART, CMOS level (ASC0) interface for AT commands:

- Autobauding from 2.4 up to 57.6 Kbps
- Fixed baud rate up to 115.2 Kbps

• Two wires RS232, CMOS level (ASC1) for PYTHON debug:
• SIM card interface, 1.8 / 3 volts with auto-detection, hot insertion

• 21 x GPIO ports (max)

• 3 x A/D converters

• 1 x D/A converter

• 1 x buzzer output

• 1 x vibrator motor driver output
• 1 x single led supply output

In order to meet the competitive OEM and vertical market stringent requirements, Telit supports its
customers with a dedicated

Support Policy

with:

•

Telit

Evaluation Kit EVK2

to help you develop you application;

• A Website with all updated information available;

• an high level specialist technical support to assist you in your development;

For more updated information concerning product Roadmap and availability, technical characteristics,
commercial and other issues, please check on the Telit website

www.telit.com

> Products > Modules.

NOTE: Some of the performances of the

Telit modules

depend on SW version installed on the module

itself.
The

Telit modules

SW group is continuously working in order to add new features and improve the

overall performances.
The

Telit modules

are easily upgradeable by the developer using the

Telit

Flash Programmer.

Furthermore, all the

Telit modules

have the conformity assessment against R&TTE.