5 at commands – Rainbow Electronics GC864-PY User Manual
Page 40
Telit GE864 and GC864 Product Description
80273ST10008a Rev. 14 - 18/09/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 40 of 62
5 AT Commands
The
Telit GE864 / GC864 module
can be driven via the serial interface using the standard AT commands
1
.
The
Telit GE864 / GC864 module
is compliant with:
1. Hayes standard AT command set, in order to maintain the compatibility with existing SW
programs.
2. ETSI GSM 07.07 specific AT command and GPRS specific commands.
3. ETSI GSM 07.05 specific AT commands for SMS (Short Message Service) and CBS (Cell
Broadcast Service)
4. FAX Class 1 compatible commands
Moreover the
Telit GE864 / GC864 module
supports also Telit proprietary AT commands for special
purposes.
For a more information about AT commands supported by GE864/GC864 modules please refer to
document AT Commands Reference Guide, code 80000ST10025a.
1
The AT is an ATTENTION command and is used as a prefix to other parameters in a string. The AT command
combined with other parameters can be set up in the communications package or typed in manually as a
command line instruction.