Rainbow Electronics DS1384 - Manual (Page 17)

DS1384
17 of 17
DS1384 FP PACKAGE OUTLINES
NOTES:
1. DIMENSIONS D1 AND E1 INCLUDE
MOLD MISMATCH, BUT DO NOT
INCLUDE MOLD PROTRUSION;
ALLOWABLE PROTRUSION IS 0.25 MM
PER SIDE.
2. DETAILS OF PIN 1 IDENTIFIER ARE
OPTIONAL BUT MUST BE LOCATED
WITHIN THE ZONE INDICATED.
3. ALLOWABLE DAMPER PROTRUSION
IS 0.08 MM TOTAL IN EXCESS OF THE
B DIMENSION; AT MAXIMUM
MATERIAL CONDITION. PROTRUSION
NOT TO BE LOCATED ON LOWER
RADIUS OF FOOT OF LEAD.
4. CONTROLLING DIMENSIONS:
MILLIMETERS.
PKG DS1384FP
DIM MIN MAX
A - 2.45
A1 0.10 0.30
A2 1.95 2.10
D 13.65 14.30
D1 9.90 10.00
E 13.65 14.30
E1 9.90 10.00
L 0.63 1.03
e 0.80 BSC
B 0.30 0.45
C 0.13 0.23
56-G3001-001, 56-G4012-001