Rainbow Electronics MAX5123 - Manual (Page 5)

MAX5122/MAX5123
+5V/+3V, 12-Bit, Serial, Force/Sense DACs
with 10ppm/°C Internal Reference
_______________________________________________________________________________________ 5
Note 1: Accuracy is guaranteed by the following table:
Note 2: Offset is measured at the code closest to 10mV.
Note 2: The temperature coefficient is determined by the “box” method, in which the maximum
∆
V OUT over the temperature range
is divided by
∆
T and the typical reference voltage.
Note 4: Accuracy is better than 1.0LSB for V OUT = 10mV to (V DD - 180mV). Guaranteed by PSR test on end points.
Note 5: R LOAD =
∞
and digital inputs are at either V DD or DGND.
TIMING CHARACTERISTICS—MAX5123 (+3V)
(V DD = +3V ±10%, AGND = DGND, 33nF capacitor at REFADJ, internal reference, R L = 5k
Ω
, C L = 100pF, output amplifier connected
in unity-gain, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)
ns 60 t CSS
CS Fall to SCLK Rise Setup Time
ns 150
ns
C LOAD = 200pF
75
t CSW
t CL SCLK Pulse Width Low
CONDITIONS
ns 150 t CP SCLK Clock Period
ns 75 t CH SCLK Pulse Width High
ns 0 t CSH SCLK Rise to CS Rise Hold Time
CS Pulse Width High
ns 75 t CS1
CS Rise to SCLK Rise Hold Time
C LOAD = 200pF ns 200 t DO1
SCLK Rise to DOUT Valid
Propagation Delay Time
ns 200 t DO2
SCLK Fall to DOUT Valid
Propagation Delay Time
ns 10 t CS0 SCLK Rise to CS Fall Delay Time
ns 60 t DS SDI Setup Time
ns 0 t DH SDI Hold Time
UNITS MIN TYP MAX SYMBOL PARAMETER
16 5
33 3
4095
4095
Accuracy Guaranteed
To Code: From Code:
V DD
(V)