Finalizer setup – TC Electronic Finalizer 96k User Manual
Page 11
11
Example 3
Mastering from DAT to DAT
1.
Connect the Digital Output of DAT #1 to the Digital Input
of the Finalizer.
2.
Connect the Digital Output of the Finalizer to the Digital
Input of DAT #2.
Using the Finalizer with ADAT and BRC
1.
Connect the Finalizers optical out to the ADATs optical in.
2.
Connect the ADATs optical out to the Finalizers optical in.
3.
Enter the In section of the Finalizer (Main page) and set the
"Clock" to "ADAT".
This will force the Finalizer to follow the clock of the ADAT.
Note: This is only possible when using the Analog Inputs of the Finalizer.
Example 4
FINALIZER SETUP