TC Electronic BMC-2 - Manual (Page 9)

muting. In case the input sources are not synchronous,
or even at different sample rates, a small period of
muting can be expected during switching.
Note that input sample rates may well be identical
without being synchronous. BMC-2 constantly monitors
and indicates if inputs are synchronous to the one
currently selected. When the LOCK LEDs are lit
steadily, this indicates that the input signals are
synchronous. When the LOCK LEDs blink, this means
inputs are not synchronous.
Any selected input format is passed bit-transparently to
all digital outputs with the exception of the output that
is assigned to ALT.
3 – INPUT STATUS LEDs
The LEDs in the left column indicate that a signal is
recognized. The LEDs in the right column indicate that
an audio signal is present on that particular input.
Signal recognized Signal present
4 – ADAT SEL Button
This button has two functions.
Selecting ADAT Channel Pairs:
Press the ADAT button briefly to switch between ADAT
channel pairs 1-2 and 3-4 (Channel pairs 5-6 and 7-8
are not available).
9
EN
OPERATION