TC Electronic RH750 - Manual (Page 23)

21
EN
Input Section
Input connector
Input impedance
Gain range
Tone controls
Bass
Low Mid
High Mid
Treble
TweeterTone
TubeTone
SpectraComp
Preset Level
User Memories
Tuner
Tuning range
Mute
Master Level Headphone
Output
Impedance
Mains supply
Speaker out
Power rating
Balanced output
1/4” jack
1 MOhm / 100 pF
-96 to 32 dB
Default Freq: 200 Hz (range: 71-1120 Hz, Gain:
+15/-24 dB) - Shelving type.
Default Freq: 400 Hz (range: 100-1600 Hz, Gain:
+15/-24 dB)
Default Freq: 800 Hz (range: 200-3150 Hz, Gain:
+15/-24 dB)
Default Freq: 4000 Hz (range: 400-6300 Hz, Gain:
+15/-24 dB) - Shelving type.
-12 to 12, L-PAD Cabinet Recreation
0 to 12, Tube amp Recreation
3 band Spectral Compression
-12 dB to 0 gain attenuation
3 memory locations storing all front panel controls
except Mute & Master Level
Chromatic, constant on A0 (27.50 Hz) to E5 (659.26 Hz)
Mutes speaker out, Phones out and Balanced out
Studio quality headphone amp
40 to 600 Ohm
Universal 100 - 240V 50/60Hz
(100w @ 1/8 Power)
Combined Speakon / 1/4” jack
750 W (1200 W Peak)
Transformer Balanced XLR, Pre/Post Pre-amp
Max. Output
Optimal Load Impedance
Preamp out
Power amp in
Rehearsal input
Digital Recording out
Remote connection
Operating/Storage
Temperature
Humidity
Dimensions
Weight
Finish
+0 dBu
600 Ohm
1/4” Jack, Balanced Output,
Max Output Level = +8 dBu
1/4” Jack, balanced input, impedance = 10 kOhm,
Max Input Level = +8 dBu
RCA, Left/Right input, fits to iPod ®
Balanced XLR, AES/EBU, (24 Bit)
5 pin DIN, Cable with shield
0° C to 50° C / -30° C to 70° C
Max. 90 % non-condensing
275 x 290 x 66 mm / 10,8” x 11,4” x 2,6”
4kg / 8.8 pounds
Anodized aluminum front plated and painted steel
chassis
appendIx – technIcal SpecIfIcatIonS
21
en
Due to continuous development, these specifications
are subject to change without notice.