TC Electronic RH750 - Manual (Page 17)

rear panel
15
en
MAINS IN
DIGITAL OUT AUX IN
INSERT
PRE/AMP I/O
LINE DRIVER OUT
PHONES
REMOTE IN
SPEAKER OUT
4 Ohm
minimum load
speakon w/ center 1/4" jack
AES/EBU 96kHz
(S/PDIF Compatible)
rehearse
transformer balanced
PRE PRE/POST
PRE-AMPLIFIER POST
5 V/100 mA
100-240VAC 50/60Hz
~
MAINS GROUND MUST BE CONNECTED
100W @ 1/8 of Max. Output
C L A S S - D B A S S A M P L I F I E R
WARNING
AVIS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE. RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPEAKER FREE OPERATION ALLOWED
R
C US
FILE# 186633
PRE/POST
PREAMP
Rear Panel
1 – MAINS IN – Power In & POWER switch
The RH750’s auto-sensing switchmode power-supply accepts
any mains voltage from 100 to 240 volts – you do not have
to change settings, fuses or anything else. Simply connect a
standard IEC three pin connector to the local mains voltage, and
you are up and running. This is particularly handy when you use
the RH750 on a tour.
The ground pin of the PSU must be connected in order to avoid
voltage differences between e.g. the PA and the RH750.
2 – PHONES
This is a 1/8” mini-jack connector for headphones. Our studio
quality headphone amp – with a mild speaker filter added to the
bass sound – caters for great sound in the headphones.
The headphone output also plays back any signal connected to
the AUX IN (“Rehearsal”) input jack found on the rear panel of
the RH750. This feature allows you to play along with e.g. an
MP3 player (e.g. an iPod®), a signal from a computer soundcard
or any other audio source playing background tracks – excellent
for rehearsing or checking out new tracks without disturbing the
neighbors.
Notice that the RH750 works equally well with or without
a speaker cabinet connected.