RocketFish RF-WHP212 - User Manual - Manual (Page 13)

13
RF-WHP212-A
Connecting the AC adapter to the docking station
Cautions:
To avoid risk of fire and to prevent damage, only use the AC
adapter supplied with your wireless headphones. Make sure
that the AC power outlet matches the AC adapter’s 100-240V
before making the connection.
Plug the AC adapter into the power outlet only after all other
connections are completed.
To connect the AC adapter to your docking station:
1 Connect the AC adapter connector to the docking station’s
DC 5V jack.
2 Connect the AC adapter plug to an AC power outlet.
3 Turn the Power switch on the back of the docking station to
“ON.” The PAIRING indicator begins to blink (blue).
Using your system
Charging the headphones
Important: Before using the wireless headphones for the first
time, make sure that the batteries are fully charged for at least
four hours. This will provide a longer operating lifetime for the
batteries.
To charge the headphones:
• Place the headphones onto the docking station. Make sure
that the headphone charging contacts and the docking
station charging pins make contact.
• The docking station CHARGING indicator turns red to
indicate the headphones are charging.
RF-WHP212-A_12-1083_MAN_V1.fm Page 13 Wednesday, November 7, 2012 8:04 AM