Cobalt Digital COMPASS 9032 HD_SD (SD Only) 12-bit Analog to Digital Converter - Manual (Page 17)

9032-SD Owner’s Manual •••• (V 2.1) Page 17
Menu Item Format Description
Frame Sync
OK / Reference Invalid /
Reference Incompatible Displays the status of the
frame sync
Settings Saved / Unsaved
Displays whether the
current settings have been
saved to a preset
Menu Item Format Description
Framesync Enable On/Off
Enables the Frame Sync
Horizontal Offset 0-4125 samples
Applies additional
horizontal offset
Vertical Offset 0-1124 lines
Applies additional vertical
offset
Minimum Latency
Frames
0-13
Selects the minimum
frames of latency allowed.
Video Audio Delay
Offset ms
(-575) - 575
Audio delay offset in
addition to delay to match
video delay.
Framesync Status On/Off/Error Shows the status of the FS
Frame Sync
Reset Framesync Confirm
Resets the FS and its
buffers. Re-establishes
audio video sync after a
adjusting the horizontal
and vertical offsets.
Menu Item Format Description
Mode –
Selects to either pass,
replace, or insert a
specified AFD code.
Code –
Allows the user to enter
an AFD code.
AFD
Line –
Allows the user to specify
the VBI line number
where the AFD resides.
Menu Item Format Description
Card Name
Up to 32 ASCII
Characters Allows the card to be
renamed in the Tree View.
Selected Preset
1-16 Selects a preset to Save or
Load.
Presets
Preset Name
Up to 6 ASCII
Characters Specifies a unique name
when saving a preset.