Cobalt Digital COMPASS 9032 HD_SD (SD Only) 12-bit Analog to Digital Converter - Manual (Page 13)

9032-SD Owner’s Manual •••• (V 2.1) Page 13
Proc Phase
This is Chroma (C channel) phase adjustment, expressed in degrees, ranging from –360 to +360 in
steps of one degree.
Decoder SD Input
Selects the input format for SD analog video. This must be changed to reflect the analog video format
on the input for the 9032-SD to lock correctly. Valid SD formats are GBR, Component SMPTE,
Component MII, Component Betacam, Component Y/C, and Composite.
SD Pedestal (Setup)
Selects between 0 IRE and 7.5 IRE of setup (pedestal) on the input analog SD signal. This tells the
card how much setup needs to be removed from the input.
Select Default Source SDI / Analog
Selects the input that has priority when both SDI and Analog inputs are detected.
AFD Submenu
Menu Structure Parameter Type
Mode —
Code AFD Code on output SDI
AFD
Line VBI line for AFD code on
output SDI
Mode
Selects to either pass, replace, or insert a specified AFD code.
Code
Allows the user to enter an AFD code.
Line
Allows the user to specify the VBI line number where the AFD resides.
Frame Sync Submenu
Menu Structure Parameter Type
Enbl Frame Sync Enable
HOS Horizontal Offset
VOS Vertical Offset
LATL Line Latency
LATF Field Latency
ADLY Audio Delay
FS
RSET Frame Sync Reset
Frame Sync Enable
Enables the frame sync. If disabled the output video timing matches the input video timing.
Horizontal Offset
Allows the user to specify an additional horizontal offset between the output video and the frame sync
reference in sample clock periods.