Cobalt Digital COMPASS 9064 Up_Down_Cross Converter - Manual (Page 42)

3
9064 Function Submenu List and Descriptions
3-12 9064 PRODUCT MANUAL 9064-OM (V4.1)
Provides video format down-conversions and aspect
ratio controls.
Note: Scaling and/or format conversion removes ATC packets (if present). If ATC packets are present, use the AFD,
Timecode, and Closed Captioning functions described in this manual to preserve and re-apply packets on the output
SDI.
• Scaler enable Enables or bypasses Scaler function as follows:
• Enabled: Provides Scaler functions for the received video input.
• Bypassed: Received video input bypasses the Scaler functions.
Scaler
• Current Input Format Displays the input format of the video currently being received by the 9064
(for example, 1080p at 29.97 Hz frame rate as shown here).
Note: Rates displayed for progressive formats are frame rates; rates
displayed for interlaced formats are field rates.
Current Input Format
• Current Output Format Displays the currently selected output format of the video currently being
processed by the 9064 (for example, 1080p at 29.97 Hz frame rate as
shown here). The output format displayed is the output present on the
card’s SDI OUT BNC connectors.
Current Output Format
Note: Output format shown in this display tracks with selection made in
or drop-down lists. Output Format
display only tracks with changes applicable to the currently
received input format (for example, when currently receiving HD
video, changes made in the
drop-down list have no
effect on the Output Format display). Output format also tracks
with any applicable Scaler functions that affect output format.
Note: Rates displayed for progressive formats are frame rates; rates
displayed for interlaced formats are field rates.
Table 3-2 9064 Function Submenu List — continued