Moog Music MP-201 Multi-Pedal (User's Guide) - Manual (Page 8)

MP-201 Multi-Pedal Manual
Firmware v2.0 Addendum
[6] COPY/SWAP: This menu contains the options to copy & swap presets,
and new options to copy/swap channels within the current preset.
(1) COPY CHANNEL - Copy all the settings from any one channel to another within the currently-active
preset.
(2) SWAP CHANNELS - Swap the settings of any two channels within the currently-active preset.
(3) COPY PRESET - Copies a preset to any new location.
As with Copy Channel, this overwrites the data at the destination location.
(4) SWAP PRESETS - Pick any two presets in memory and swap which preset is in which location.
[7] SEND SYSEX: All MP-201 Sysex-sending functions have been collected on this new menu.
(1) SEND ALL PRESETS - Send a bank of 100 MP-201 user presets as one SysEx file.
(2) SEND PRESET - Send the currently-active preset as a 310-byte SysEx file.
(3) SEND BULK DUMP - Send one large file which contains all 100 User presets and all Global settings.
(4) SEND FACTORY - Send the 40 Factory presets as a SysEx file.
If you send this file to the MP-201, it will load into the Factory preset memory
and not directly to the active user presets.
(5) SEND FIRMWARE - Send the MP-201 firmware as a SysEx file.
This can be used to update another MP-201 to the current firmware version.
[8] RESTORE FACTORY: Restores all presets and global settings to factory defaults.
[9] CALIBRATE FPEDAL: Calibrate the response of the built-in Foot Pedal control.
Do this if the foot pedal response seems incorrect.
Page | 8 Specifications subject to change without notice moogmusic.com