Moog Music Minimoog Voyager XL User Manual
Page 71

Page 72
Voyager XL User’s Manual - MASTER Mode Factory Setups
Page 73
Voyager XL User’s Manual - MASTER Mode Factory Setups
1.3 MASTER VOLUME
The MASTER VOLUME function is used to invert the stored
Master Volume values of the Voyager XL Presets. This can be
useful if you have a bank with all Master Volume values set to ‘0’;
this function will change all Preset Volumes to their maximum
value. To perform this function, use the CURSOR to select ‘YES’
and press ENTER. To left this menu without changes, select
‘NO’ and press ENTER.
1.4 T.S. XYAG DEST.
The T.S. XYAG DESTINATION function is used to restore the
default parameters of the Touch Surface destinations, MIDI CC
values, direction of control, and amounts for the X,Y, and Area
axes as well as the Touch Surface Gate. The default values are:
TS-X: Filter Cutoff
MIDI CC: Off
Direction: Normal
Amount: 50%
TS- Y: Filter Spacing
MIDI CC: Off
Direction: Normal
Amount: 50%
TS-A: Filter Resonance
MIDI CC: Off
Direction: Normal
Amount: 50%
Gate: No switch
MIDI CC: 88
Polarity: Normal
To restore the T.S. XYAG Destination defaults , use the CURSOR
to select ‘YES’ and press ENTER. To leave this menu without
changes, select ‘NO’ and press ENTER.
1.2 FACTORY SOUNDS
The FACTORY SOUNDS function restores the Voyager XL to
its default factory state. Performing this function will replace
the current bank with the standard Voyager Performer Edition
Preset Bank, so don’t do this unless you are sure you want to.
To restore the factory presets select ‘YES’ and press ENTER. To
escape without restoring the Factory presets, select ‘NO’ and
press ENTER.