Moog Music Minimoog Voyager XL - Manual (Page 48)

Page 50
Voyager XL User’s Manual - EDIT Mode
Page 51
Voyager XL User’s Manual - EDIT Mode
Edit Mode
Edit Mode is used to assign the parameters of a preset that are not accessible through the front panel
controls. Edit Mode is also used to assign the preset sound category, set the MIDI clock divider, and name
and save presets. Press the EDIT button to enter Edit Mode.
To select an Edit Mode function, use the
-1/+1 buttons to highlight the desired function and then press ENTER.
The Voyager XL has twenty four Edit Mode functions that span six pages as shown below.
Voyager XL EDIT menus
In addition to the functions shown, Edit Mode also features an octave transpose function that allows you
to shift the Voyager XL Keyboard up to plus or minus two octaves. To access the transpose menu at any
time, press the EDIT button twice (press once if already in Edit
Mode). The display will appear as shown. Use the -1/+1 buttons
to transpose the octave as desired (NULL is the Voyager XL default
setting). The new transpose setting will remain until it is changed, or
until the Voyager XL is powered off.
To exit the transpose menu, press EDIT.