beautypg.com

Exploded assembly diagram, Important notice - read this first, Photographic tip – Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hub and 1PC Rotor) User Manual

Page 2

background image

Exploded Assembly Diagram

66

P

IS

T

O

N

PIS

T

ON

21

20

17

12

11

9

6

18

15

16

10

EXISTING
SPINDLE NUT

SRP DRILLED/SLOTTED
PATTERN ROTOR

GT SLOT PATTERN ROTOR

4(2)

1

22

24

19

3(1)

13

2

2A(1)

5

23

8

14

EXISTING STOCK NUT

7(2)

Y

Z

WARNING

INSTALLATION OF THIS KIT SHOULD ONLY BE
PERFORMED BY PERSONS EXPERIENCED IN
THE INSTALLATION AND PROPER OPERATION
OF DISC BRAKE SYSTEMS.

NOTE

SPECIFIC PARTS MAY VARY FROM DIAGRAM

Figure 1. Typical Installation Configuration

Important Notice - Read This First

Before any tear-down or disassembly begins, review the following information:
• Review the wheel clearance diagram (figure 2, page 4) to verify that there is adequate clearance with the

wheels you will be using with the installation.

• Front brake kits do not include flex lines. OEM brake lines will not adapt to Wilwood calipers. Check the

assembly instructions, or associated components section for brake line recommendations before assembly.
In addition, Wilwood offers an extensive listing of brake lines and fittings on our web site:

www.wilwood.com

.

• Due to OEM production differences and other variations from vehicle to vehicle, the fastener hardware and

other components in this kit may not be suitable for a specific application or vehicle.

• It is the responsibility of the purchaser and installer of this kit to verify suitability / fitment of all components

and ensure all fasteners and hardware achieve complete and proper engagement. Improper or inadequate
engagement can lead to component failure.

• This kit will decrease track width (pull in your wheels) .31” per side from the OEM drum brake mounting face

and .05” from the OEM disc brake mounting face. Verify that track width change will not cause interference
before assembling kit.

Page 2

Photographic Tip

Important and highly recommended: Take photos of brake system before disassembly and during the disassembly process. In the
event, trouble-shooting photos can be life savers. Many vehicles have undocumented variations, photos will make it much simpler for
Wilwood to assist you if you have a problem.