Grain Systems PNEG-1754 - Manual (Page 5)

1. Installation
PNEG-1754 Tower Dryer Ladder Installation Instructions 5
Roof Hatch Platform Assembly
1. Assemble the roof hatch platform (GT4-1051-XXA), as shown in Figure 1B , in such a way that one
section of the roof hatch platform will be aligned with the peak walk around entrance and the other
section will be aligned with the manhole cover section of the roof. Make sure the catwalk upper clips
(GT1-0162) are assembled on the fourth hole from the top on the vertical channel, as shown in
Figures 1C and 1D on Page 6 .
Figure 1B