Grain Systems PNEG-1594 - Manual (Page 7)

PNEG-1594 Page 7 of 11
Omron H5CR Timer Replacement Kit Instructions
CFAB 150-320 Wiring Instructions (Continued)
17. Add a wire labeled 84 between Cool Timer terminal 6 and DTR terminal 9.
18. Add a wire labeled 84 between DTR terminal 9 and UTR terminal 12.
19. Add a wire labeled 86 between Unload Timer terminal 6 and CTR terminal 9.
20. Add a wire labeled 86 between CTR terminal 9 and UTR terminal 10.
21. Add a wire labeled 29 between UTR terminal 9 and Dry Timer terminal 6.
22. Add a wire labeled 87 between Unload Timer terminal 8 and CTR terminal 5.
23. Add a wire labeled 80 between UTR terminal 5 and Dry Timer terminal 7.
24. Add a wire labeled 81 between UTR terminal 8 and Cool Timer terminal 7.
25. Add a wire labeled 82 between UTR terminal 6 and Unload Timer terminal 7.
26. Connect a white wire (neutral) to any AC neutral wire connection (white wire that is labeled 2) and
connect the other end of it to UTR terminal 14.
27. Add a wire labeled 2 between UTR terminal 14 and CTR terminal 14.
28. Add a wire labeled 2 between CTR terminal 14 and DTR terminal 14.