Grain Systems Unload Augers PNEG-1057 - Manual (Page 12)

Introduction
4
8" & 10" Commercial Vertical Bin Unloading Auger - PNEG 1057
1. General Information
A. We reserve the right to improve our product whenever possible and practical to do so. We
reserve the right to change, improve, and modify products at any time without obligation to
make changes, improvements, and modifications on equipment sold previously.
B. The 8" & 10" Commercial Vertical Bin Unload Augers have been designed and manufactured
to give years of dependable service. The care and maintenance of this machine will affect the
satisfaction and service obtained. By observing the instructions and suggestions we have
recommended, the owner should receive competent service for many years. If additional
information or assistance should be required, please contact the factory or your local dealer.
C. When receiving merchandise, it is important to check both the quantity of parts and their
descriptions with the packing list enclosed within each package. All claims for freight
damage or shortage must be made by the consignee within ten (10) days from the date of the
occurrence of freight damage. The consignee should accept the shipment after noting the
damage or loss.
2. Capacity
A. The capacities may vary greatly under varying conditions. The following factors play a role
in the performance of the auger:
• Speed • Amounts of foreign matter
• Angle of operation • Different materials
• Moisture content • Methods of feeding
B. For example, a twenty-five percent (25%) moisture could cut capacity by as much as
40% under some conditions.