Decals, Caution, Safety decals – Grain Systems Unload Augers PNEG-1057 User Manual
Page 10
Decals
2
8" & 10" Commercial Vertical Bin Unloading Auger - PNEG 1057
Safety Decals
!
CAUTION
FAILURE TO PROPERLY SELECT,
INSTALL OR MAINTAIN AN AUGER, ITS
DRIVE OR OTHER COMPONENTS CAN
RESULT IN DANGEROUS OPERATION.
THIS EQUIPMENT IF IMPROPERLY
SELECTED, INSTALLED OR MAIN-
TAINED MAY FAIL AND COULD RESULT
IN SERIOUS INJURY OR PROPERTY
DAMAGE.
CHECK PRODUCT LITERATURE
AND EQUIPMENT MANUFACTURER'S
LITERATURE OR CALL THE FACTORY
FOR FURTHER INFORMATION.
DC-1234
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-995
SHEAR POINT
Keep clear of rotating auger and
moving parts.
Do not remove or modify guards.
Disconnect and lock out power
before servicing.
Failure to do so will result in
serious INJURY or DEATH.
DC-1381
1
2
3
4
1.
READ AND UNDERSTAND THE OPERATOR’S MANUAL AND
ALL SAFETY INSTRUCTIONS.
2.
DO NOT OPERATE WHILE UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL.
3.
DO NOT OPERATE UNLESS ALL SAFETY EQUIPMENT,
SWITCHES, GUARDS AND SHIELDS ARE SECURELY IN
PLACE AND OPERATIONAL.
4.
ALLOW ONLY TRAINED AUTHORIZED PERSONNEL IN THE
OPERATING AREA.
5.
ANY ELECTRICAL WIRING OR SERVICE WORK MUST BE
PERFORMED BY A QUALIFIED ELECTRICIAN. IT MUST
MEET ALL STATE AND LOCAL ELECTRICAL CODES.
6.
DO NOT ALLOW CHILDREN IN THE AREA OF OPERATION.
7.
KEEP HANDS, FEET AND CLOTHING AWAY FROM MOVING
PARTS.
8.
DISCONNECT AND LOCKOUT POWER BEFORE MAKING ANY
ADJUSTMENTS OR PERFORMING ANY SERVICE WORK.
9.
DISCONNECT POWER PRIOR TO RESETTING ANY MOTOR
OVERLOAD.
10. MAKE CERTAIN ALL ELECTRIC MOTORS ARE GROUNDED.
11. REPLACE ALL WORN OR DAMAGED LABELS IMMEDIATELY.
The Safety Decals chart below lists all the safety decals that should be included with the auger. Inspect all decals and
replace any that are illegible, worn, or missing. Contact your dealer or the manufacturer to order replacement decals.
Ref. #
Part #
Qty.
Description
Size
1
DC-1381
1
Danger - Shear Point
4-1/2" x 2"
2
DC-995
1
Warning—Shear Point
4-1/2" x 2"
3
DC-1234
1
Caution
2-1/4" x 2-3/4"
4
DC-1379
1
Notice
5-1/8" x 7-3/8"
Safety Decals