Ga) with a base insert (2–14 ga), Ener (2–5 ga) with a base insert (2–14 ga), Chapter 6: stiffeners – Grain Systems Tanks PNEG-4105 User Manual

Page 65

Close-Punch Laminated Stiffener (2 Ga) with an Insert (10–14 Ga) to
a Laminated Base Stiffener (2–5 Ga) with a Base Insert (2–14 Ga)

Reference the following information for a close-punch connection of a two-ring stiffener (CTS-2079XX and
CTS-2081XX) to a laminated base stiffener and insert (CTS-2114XX and CTS-2113XX).

Figure 6-22 Close-Punch Laminated Stiffener with an Insert to a Laminated Base Stiffener with a Base Insert

Close-punch laminated stiffener (CTS-2079XX)

Close-punch insert (CTS-2081XX)

Close-punch laminated base stiffener (CTS-
2114XX)

Close-punch base insert (CTS-2113XX)

3/8 x 1 Bolt (S-7485)

3/8 Nut (S-9426)

Completed assembly

NOTE: Two-post stiffeners shown. The bolt pattern will

vary for three-post. Only place bolts where holes
in the stiffeners align with holes in the sidewall
sheet.

Pneg-4105 105 Ft Diameter 40-Series Bin