Grain Systems Tanks PNEG-4075G - Manual (Page 27)

Chapter 3: Hardware Requirements
Bolt Identification
Use the following information to identify the bolts and where each must be used during installation.
Bolt S-275
An S–275 is a 5/16 x 3/4 in. YDP bolt that is pre-assembled with a sealing washer.
Bolt (S-275) is used in the following locations:
• Use in accessories.
• Color of bucket lid is dark blue.
A 0.945 in. (2.40 cm) C Grade 5
B 0.750 in. (1.90 cm) D Grade 5
Bolt S-10260
An S–10260 is a 5/16 x 1 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10260) is used in the following locations:
• Use to connect roof panels together where they overlap.
• Use when connecting eave angle to sidewall sheet.
• The color of the bucket lid is lime green.
• Use to connect eave clip to sidewall sheet on bins that are 48 ft
diameter and smaller.
• Use to attach roof panels to flashing on bins that are 48 ft diame-
ter and smaller.
A 1.300 in. (3.30 cm ) C Grade 8
B 1.000 in. (2.54 cm) D Grade 8.2
Bolt S-277
An S–277 is a 5/16 x 1 1/4 in. YDP bolt pre-assembled with a sealing washer.
Bolt (S-277) is used in the following locations:
• Use in accessories.
• The color of the bucket lid is black.
A 1.445 in. (3.67 cm ) C Grade 5
B 1.250 in. (3.17 cm) D Grade 5
Pneg-4075G 75 Ft Diameter 40-Series Bin 27