beautypg.com

Slide base, Shown for a – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-681 User Manual

Page 27

background image

11. Drive Motor and Motor Mount

PNEG-681 Series II Bucket Elevator

27

Figure 11B Right Hand Motor Placement Decals

Slide Base

1. Place the motor slide base upon top of the motor mount, with respect to the drive application side.

2. Place the motor onto the motor slide base and position the motor as close as possible toward

the pulley.

NOTE: The slide base will fit in only one set of holes.

(See Figure 11C.)

3. Position the tensioning bolt so that tightening pulls the motor AWAY from the pulley.

4. Using the proper hardware, bolt the slide base to the motor mount.

Figure 11C Motor Slide Base

See also other documents in the category Grain Systems Equipment: