Grain Systems Tanks PNEG-256 User Manual
Page 77
PNEG-256 6', 7' & 9' Bulk Feed Tanks
77
14. PARTS SECTION
9' Diameter 60° Hopper Tank Specifications
Note: Bolts listed first, nut second for each usage.
Hardware Usage: Heads of Bolts are on the outside of tank unless otherwise noted.
Ref #
Part #
Qty
Description
1
S-275
36
Bulk Tank Peak Ring to Roof Panels (Use 5/16" x 3/4" Hex Head Bin Bolts
and 5/16" Hex Nuts.)
S-396
36
2
S-275
108
Roof Panel to Roof Panel (Use 5/16" x 3/4" Hex Head Bin Bolts and 5/16"
Hex Nuts.)
S-396
108
3
S-275
108
Roof Panels to Top Sidewall Sheets (Use 5/16" x 3/4" Hex Head Bin Bolts
and 5/16" Hex Nuts.)
S-396
108
4
S-275
Varies
Vertical Sidewall Sheet Seams (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
S-396
Varies
5
S-275
Varies
Horizontal Sidewall Sheet Seams (Use 5/16" x 3/4" Hex Head Bin Bolts
and 5/16" Hex Nuts.)
S-396
Varies
6
S-275
78 or 132 Leg to Sidewall Sheet (Use 5/16" x 3/4" Hex Head Bin Bolts and 5/16" Hex
Nuts.) (Bolt Heads to Inside of Tank.)
S-396
78 or 132
7
S-277
108
Hopper Panels to Sidewall Sheet (Use 5/16" x 1-1/4" Hex Head Bin Bolts
and 5/16" Hex Nuts.) (Bolt Head to Inside at Leg to Hopper to Sidewall
Connection Only.)
S-396
108
8
S-277
6
Leg to Body Sheet to Hopper Connection (Use 10 Gauge Washer under
5/16" x 1-1/4" Hex Head Bin Bolts and 5/16" Hex Nuts.) (Bolt Head to
Inside at Leg to Hopper to Sidewall Connection Only.)
S-396
6
BLK-12483
6
9
S-4303
216
Vertical Hopper Seams (Use 5/16" x 3/4" Truss Head Bin Bolts and 5/16"
Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.)
S-3611
216
10
S-7927
18
Cross Tie Brace (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
S-456
18
11
S-7927
6
Hopper Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
S-456
6
12
S-4303
27 or 36
Hopper Collar to Hopper Panel (Use 5/16" x 3/4" Truss Head Bin Bolts and
5/16" Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.) (16" Shown)
S-3611
27 or 36