Grain Systems Tanks PNEG-256 - Manual (Page 44)

44 PNEG-256 6', 7' & 9' Bulk Feed Tanks
9. LEGS AND LEG BRACES
Tank Legs and Leg Braces
When installing legs to sidewall, reverse normal insertion procedure on bolts. Place hex head
and neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward.
This provides for a weather tight seal at the leg attachment location. See on
Page 44 to Page 46
for Leg Attachment to Sidewall Sheet details.
Figure 9A
Use 5/16" x 3/4" bin bolts and nuts when attaching the leg to base. Make sure the washer is used
on the slot side of the leg.
Figure 9B
Leg
Back Leg Anchor Plate
BLK-10057 (1 Tab)
Front Leg Anchor Plate
BLK-10058 (2 Tab)