beautypg.com

Sweep wheel installation (cont.) – Grain Systems Unload Augers PNEG-1521 User Manual

Page 33

background image

INSTALLATION

33

PNEG-1521 Commercial Direct Gear Drive Bin Sweep Auger

12. SWEEP WHEEL INSTALLATION

(Cont.)

C. Attach the Input Shaft of the Gear Driven

Reduction Drive to the final Sweep Flight using
two (2) 5/8" x 4" Grade 8 bolts and Stover nuts.
Attach the Mounting Bracket to the Final Back
Shield with two (2) 3/8” x 1-1/2” Grade 8 bolts,
two (2) flat washers and two (2) Nylock nuts.

FIG.12-C

5/8" x 4" Grade 8
Hex Bolt

5/8" Stover Nut

3/8" Flat Washer

3/8" Nylock Nut

3/8" Flat Washer

3/8" x 1-1/2" Hex Bolt

See also other documents in the category Grain Systems Equipment: