beautypg.com

Installing the sweep flighting (cont.) – Grain Systems Unload Augers PNEG-1521 User Manual

Page 28

background image

INSTALLATION

28

PNEG-1521 Commercial Direct Gear Drive Bin Sweep Auger

E. Place the Bearing Stand Assembly onto the

Connecting Shaft.

11. INSTALLING THE SWEEP FLIGHTING

(Cont.)

C. Fasten the first section of Sweep Flight to the

U-Joint Flight Shaft with two (2) 5/8" x 4" Grade 8
bolts and Stover nuts. Make sure that the
Dura-Edge side of the Sweep Flight faces the
center of the Bin.

D. Next, bolt the 2" OD x 11-½” Connecting Shaft to

the Sweep Flight with two (2) 5/8" x 4" Grade 8
bolts and Stover nuts.

U-Joint

Flight Shaft

5/8” Stover Nuts

5/8” x 4” Grade 8 Bolts

Sweep

Flight

Assembled

Sweep Flight

5/8” x 4” Hex Bolt

5/8” Stover Nut

Connecting

Shaft

Bearing Stand Assembly

Connecting Shaft

FIG. 11-C

FIG. 11-D

FIG. 11-E

See also other documents in the category Grain Systems Equipment: