beautypg.com

Installing the belts, Installing the motor (continued) – Grain Systems Unload Augers PNEG-1556 User Manual

Page 25

background image

3. Installation

PNEG-1556 8", 10" and 12" Commercial Vertical Drive Unit - Dual Drive

25

Installing the Motor (Continued)

Figure 3Q

Installing the Belts

A. Place the belts onto the pulleys.

B. Screw the lower motor mount adjustment nut upward, raising the motor mount plate and putting

tension on the belts.

C. Once the desired tension is reached, tighten the upper motor mount adjustment nut down onto the

motor mount plate, thereby locking it into place.

See also other documents in the category Grain Systems Equipment: