Banks Power GM Motorhomes: (Gas ’01 - 10 8.1L Workhorse) Programmer- AutoMind Programmer '03-05 Class-A MH - Manual (Page 12)

12
96374 v.4.0
The Options menu should only be
utilized to check for the current vehicle
tune, to set or clear a password, and
if directed by Banks staff. Many of
the listed options are not necessary
to complete the Banks Performance
tune. The listed options are to be used
primarily for the identification of serial
numbers and ID’s.
Note: Fuse 21 does not need to be
removed for options.
1.
Open the option menu by
highlighting then press ENTER. (See
Figure 14). The Options menu
displays the available parameters and
specific data assigned to your Banks
OttoMind programmer. Scroll through
the list using the list using the UP and
DOWN arrow keys to view the Options
menu contents. See Figure 20
-Pc communication- The ‘Pc
communication’ option is for Banks
authorized service only. This feature is
not intended for customer use.
-Display Serial No.- The ‘Display
Serial No.’ option displays the Banks
OttoMind programmer serial number
and manufacture date.
-Set Password- The ‘Set Password’
option allows you to set your own
personal password. Use the Up or
Down arrow keys to scroll through
and set a numeric digit. Use the Left
and Right arrow to move to the next
digit. Repeat the previous instruction
until you have set all four digits to your
liking, and then press the enter button
on the keyboard.
-clear Password- The ‘clear Password’
option allows you to clear the
previously set security password.
Press the Enter button on the
keyboard to clear the previously set
security password.
-Tool ID- The ‘Tool ID’ option displays
the tool identification number.
-About Tool- The ‘About Tool’ option
displays the current Banks OttoMind
installed software and hardware.
-Tool Status- The ‘Tool Status’
option displays the Banks OttoMind
programmer locked or unlocked
status.
NOTE: The Banks OttoMind
programmer will become locked once
the factory tune has been backed-up.
You will not be able to use the Banks
OttoMind programmer on any other
vehicle when it is in a locked status.
You will however be able to use the
diagnostic and real time data reading
capabilities on any 8.1L workhorse
class-A motorhome and other GM
vehicles, regardless of tool status. See
Figure 21.
Section 5
OPTIONS
Figure 20
OPTIONS
PC Communication
Display Serial No.
Set Password
Clear Password
Tool ID
About Tool
Tool Status
Car Tune
Send Software ID
Figure 21
Tool Status
Tool is Unlocked
Press any key