Disclaimer of liability, Limitation of warranty – Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Tuner- Six-Gun Diesel Tuner '07-09 (PDA) Compatible w_ Optional PowerPDA User Manual
Page 2

2
96508 v.7.0
THIS IS A HIGH PERFORMANCE
PRODUCT. USE AT YOUR OWN RISK.
Do not use this product until
you have carefully read the
following agreement.
This sets forth the terms and
conditions for the use of this
product. The installation of
this product indicates that
the BUYER has read and
understands this agreement
and accepts it’s terms and
conditions.
Disclaimer of Liability
Gale Banks Engineering Inc., and it’s
distributors, employees, and dealers
(hereafter “SELLER”) shall in no way be
responsible for the product’s proper use
and service. The BUYER hereby waives
all liability claims.
The BUYER acknowledges that he/
she is not relying on the SELLER’s skill
or judgment to select or furnish goods
suitable for any particular purpose
and that there are no liabilities which
extended beyond the description
on the face hereof and the BUYER
hereby waives all remedies or liabilities,
expressed or implied, arising by law
or otherwise, (including without
any obligations of the SELLER with
respect to fitness, merchantability, and
consequential damages) whether or not
occasioned by the SELLER’s negligence.
The BUYER is responsible to fully
understand the capability and
limitations of his/her vehicle according
to manufacturer specifications and
agrees to hold the SELLER harmless
from any damage resulting from the
failure to adhere to such specifications.
The SELLER disclaims any warranty
and expressly disclaims any liability
for personal injury or damages. The
BUYER acknowledges and agrees
that the disclaimer of any liability for
personal injury is a material term for
this agreement and the BUYER agrees
to indemnify the SELLER and to hold
the SELLER harmless from any claim
related to the item of the equipment
purchased. Under no circumstances will
the SELLER be liable for any damages
or expenses by reason of the use or sale
of any such equipment. The BUYER
is responsible to obey all applicable
federal, state, and local laws, statutes,
and ordinances when operating his/her
vehicle, and the BUYER agrees to hold
SELLER harmless from any violation
thereof. The SELLER assumes no liability
regarding the improper installation or
misapplication of it’s products. It is
the installer’s responsibility to check
for proper installation and if in doubt,
contact the manufacturer. The BUYER is
solely responsible for all warranty issues
from the automotive manufacturer.
Limitation of Warranty
Gale Banks Engineering Inc. (hereafter
“SELLER”), gives Limited Warranty as
to description, quality, merchantability,
fitness for any particular purpose,
productiveness, or any other matter of
SELLER’s product sold herewith. The
SELLER shall be in no way responsible
for the product’s open use and service
and the BUYER hereby waives all rights
except those expressly written herein.
This warranty shall not be extended or
varied except by written instrument
signed by SELLER and BUYER.
Please see enclosed warranty
information card, or go to
www. bankspower.com/warranty,
for warranty information regarding
your product. Parts or devises outside
the products kit, such as the Palm
®
Tungsten
™
E2, are not covered under
Gale Banks Engineering warranty. The
warranty for the Palm Tungsten E2
is determined by the manufacturer’s
warranty terms and conditions, and