Banks Power Ford Trucks: (Gas ’99 - 11 6.8L V10; 6.2L V8) AutoMind Flash Programmer for use with Banks iQ Flash - Manual (Page 17)

97276 v.1.0
17
Section 7
InFo & SeTTInGS
The ‘INFO & SETTINGS’ menu will allow
you to check the Programmer Version
Info, Stored Vehicle info and Stored
vehicle options. See Figure 11.
From the main menu select the “Info &
Setting’ button.
Version Info
In the Version Info screen, the AutoMind
Flash Programmer current version,
serial number information and Firmware
version will be displayed. Use this
information to verify that your AutoMind
Programmer is up to date.
Stored Vehicle Info
In the Stored Vehicle Info screen, the
programmer will display the Vehicles
current calibration, VIN, and Vehicle
Files. Use this information to verify the
current calibration in your vehicle.
Stored Vehicle options
The Stored Vehicle Options screen will
display a list of available calibration
(varies by model) that may be adjusted
and their current programmed status
in your vehicle. For example, you
may verify the current ‘Speed Limiter’
programmed in your vehicle.
Scroll Up or Down to highlight and select
an option, and press ‘OK’. The selected
vehicle option will display the current
status on the screen.
After reviewing the options, press the
‘Return icon’ to return to the previous
screen or the ‘Banks iQ’ icon to return to
the ‘Tune Vehicle’ menu.
-END, SECTION 8-
Figure 13