Banks Power Ford Trucks: (Gas ’99 - 11 6.8L V10; 6.2L V8) AutoMind Flash Programmer for use with Banks iQ Flash - Manual (Page 13)

97276 v.1.0
13
save your changes or the ‘Return
icon’ button to return to the previous
screen.
Repeat Step 6 and Step 7 to modify
all desired and available parameters.
NOTE: If you have previously flashed
your vehicle with the Banks AutoMind
programmer and made changes
to adjustable parameters, the
Programmer will retain your most
recent parameter selections. To
modify your selections when reflashing
your vehicle adjust the parameters as
desired in the adjust options screen.
8.
Press the ‘Install’ button to begin
installing the calibration.
9.
Follow the on screen instructions
and turn the ignition key ‘ON/OFF’
when prompted, but do not start the
engine.
10.
The AutoMind will incorporate
your new adjustments and create a
new calibration file. It will then ask
Figure 7
Figure 8