ACP RMS10TS Owner's Manual - Manual (Page 9)

9
14. Use Option Mode
1) This allows the user to choose various oven
operations.
2) Open the oven door and press Number Key “2” for
5 seconds. The buzzer sounds once to indicate User
Option Mode is activated.
3) LED displays “OP: - -”.
4) Press any Number Key to enter related options as
noted in chart below.
Example: To set the buzzer or key beep volume to
medium, Press Number Key “2“ “OP:22” displays.
To change, repeat pressing “2” LED displays “OP:20”,
“OP:21” ”OP:22” ”OP:23” etc.
Electronic Control Operation
5) Press key to save the selected setting. LED
displays “OP: - -” to indicate selection was saved and
another option change can be made.
6) During programming process, press key to
enter Door Open Mode. Close the door will enter Ready
Mode.
7) If key is not pressed as the last step, the
selected option will not be saved.
15. Inqury Function
During the cooking process, press key to check
the power level.
LED will display the power level for 3 seconds and then
return to remaining cook time display.
Number Keys Display Options (Factory Settings in Bold)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second beep.
Continuous beep until door is opened.
5 beep bursts until door is opened.
2
Key Beep Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
3
Key Beep
OP:30
OP:31
Prevents beep when Number Key is pressed.
Allows beep when Number Key is pressed.
4
Active Display
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is opened, keyboard disabled.
30 seconds after oven door is opened, keyboard disabled.
1 minute after oven door is opened, keyboard disabled.
2 minutes after oven door is opened, keyboard disabled.
5
On-the Fly Cooking
OP:50
OP:51
Prevents different pre-programmed Number Key to be activated during cooking.
6
Reset to Ready Mode
OP:60
OP:61
Opening oven door does not reset oven back to ready mode.
7
(some models)
Maximum Heating Time
OP:70
OP:71
Allows 60 minutes of heating time (some models).
Allows 10 minutes of heating time.
8
Manual Operation
OP:80
OP:81
Allows use of preprogrammed Number Key only.
Allows use of manual time entry and preprogrammed Number Key.
9
(some models)
Double Digit Operation
OP:90
OP:91
Allows 10 (0-9) preprogrammed Number Key.
Allows 100 (00-99) preprogrammed Number Key.
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Do not display message.
Display message for 24 hours every 7 days.
Display message for 24 hours every 30 days.
Display message for 24 hours every 90 days.
Allows different pre-programmed Number Key to be activated during cooking.
Opening oven door resets oven back to ready mode.