PACKARD BELL dot s series - Manual (Page 80)

78 - Recovery
Creating recovery discs
To reinstall using discs, you must create a set of recovery discs
beforehand. Throughout the process, you will be guided by on-screen
instructions. Please read them carefully!
Caution: If you are using a USB flash drive, ensure it is at least
12 GB and does not contain any previous data.
1. Click on Start > All Programs > Packard Bell, then click on
Packard Bell Recovery Management.
2. To create recovery backup for the hard drive’s entire original contents,
including Windows and all factory-loaded software and drivers, click
Create Factory Default Disc, or if your computer has no optical drive,
Create Factory Default Backup.
- OR -