Breakout cable – M-AUDIO Delta 410 User Manual
Page 5
• 128 MB of PC100 RAM - (96kHz operation)
64 MB of SDRAM - (48kHz operation)
UDMA EIDE or ATA 33/66
Macintosh
• 128 MB of PC100 RAM for 96kHz operation.
64MB SDRAM for 48kHz or less.
• Mac G3 or G3 accelerator with 128 MB of RAM recommended. Some
faster Power PCs will perform adequately.
• UDMA EIDE or fast SCSI HDD recommended.
Breakout Cable:
1. Analog Inputs 1-2: These jacks input analog audio from a variety of
external sources. Each jack is RCA coaxial and is compatible with
RCA coaxial (unbalanced) connections. These cables are tan in color,
with the jacks colored tan for left and red for right.
2. Analog Outputs 1-8: These jacks output analog audio to a variety of
external targets. Each jack is RCA coaxial and is compatible with RCA
coaxial (unbalanced) connections. These cables are black in color, with
the jacks multi-colored for convenience.
3. Host Cable connector: This 25-pin female D-sub connector is used to
attach the breakout cable to the PCI host card’s male D-sub connector.
5