M-AUDIO Delta 410 - Manual (Page 39)

Now click on the Delta Control Panel’s "Patchbay/Router" tab. In the first
column of the Patchbay/Router page, click the radio button "Monitor Mixer" to
connect the monitor mixer’s stereo output directly to Delta analog outputs OUT1
and OUT2. Now, everything that we hear at outputs 1 & 2 will reflect our settings
in the Monitor Mixer page.
Select the "Monitor Mixer" tab of the Delta Control Panel. The default Master
Volume fader settings are 0dB and unmuted, and all other faders are set to full
attenuation (-144dB) and muted. We will need to adjust these to our preference.
The screen capture on the next page shows the settings that we wish to achieve.
39