Velleman DVR4H3 Quick Installation Guide User Manual
Page 7
DVR4H3
Rev. 01
18/01/2012
©
Velleman nv
7
•
Select the SYSTEM menu item.
•
Go to TOOLS. Select ADMIN PASSWORD (or OPERATOR PASSWORD) and press the ENTER button
to set the password.
Note: an operator can not access the main menu, only the quick menu bar (see below).
•
Press the cursor up (
) or down (
) button to select the value of the first number and press
enter to save and go to the next character, or use the mouse to select the desired value. Repeat
this for all four password numbers.
Note: default admin password is “0000” (4 times zero).
Record settings
•
Press the MENU button and enter the password to go into the menu list.
•
Select the QUICK START menu item.
•
Select the GENERAL menu item using the NAVIGATION button.
•
Set the image size, image quality and images per second for recording.
•
Refer to the full user manual on the included CD-ROM for more details.
Audio playback
•
Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the
quick menu bar (see below). The current audio channel is indicated in the status bar.
Switch users
•
The DVR can be accessed as administrator (
) or operator (
), icons are indicated in the status
bar.
•
To switch between users, click on the user icon (
or
) to lock the current session (
).
•
Press on the key lock icon (
) than enter the password of the desired profile.
8.
Operation
Display
The following image shows the screen layout.
A system date and time
B general system status
C available HDD capacity
D channel status