Velleman CV045 - Manual (Page 5)

CV045
V. 01 – 25/05/2012 5 ©Velleman nv
Voltage drop according to cable length (24AWG)
Transmission distance
Transmission voltage
(12VDC, 0.5A)
Transmission voltage
(12VDC, 1.0A)
Transmission voltage
(12VDC, 1.5A)
50 m / 160 ft 13.5 V 15.5 V 17.0 V
100 m / 320 ft 15.5 V 18.5 V 22.0 V
150 m / 500 ft 17.0 V 22.0 V 27.0 V
200 m / 650 ft 18.5 V 25.5 V 32.0 V
300 m / 1000 ft 22.0 V 32.0 V 42.0 V
7. Technical Specifications
camera connector video BNC male / push-pin terminal
power supply male 2.1mm DC plug
monitor/DVR connector video BNC male / push-pin terminal
power supply 12V/5A power supply built-in
video impedance BNC 75 ohms unbalanced
UTP (2 push-pins terminal block) 100 ohms balanced
maximum cable length 250m
operating temperature -20°C ~ 70°C
power supply 230VAC / 50Hz
dimensions 4-channel balun receiver with power
supply built-in
250 x 170 x 45mm
passive video and power baluns 61 x 29 x 21mm
weight 4-channel balun receiver with power
supply built-in
1600g
passive video and power baluns 40g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.