Velleman CAMIP6 - Manual (Page 12)

CAMIP6
15/09/2010 ©Velleman nv 12
• The firmware filename can be found by browsing to the ftp-site (ftp:60.250.194.78), username
upgrade and password upgrade. Scroll through the available list and locate the correct version.
The name must start with VS316-gen.
• To reboot the camera, go to the reboot page and click on Reboot.
7.4 Camera List
• Once a camera has been set-up in the Auto Search directory, it must be added to the Camera
List. Right-click on Camera List and left-click on New Camera.
Note: when the camera is not added to the Camera list, it will not be available worldwide.
• Give the camera a name (e.g. its location), enter the camera ID and password and click Add. The
camera now appears under the Camera List directory.
Note: the icon in front of the camera name indicates the status.
RED: the camera is offline, not connected to the Internet
YELLOW: camera is online, but not responding (e.g. due to router settings)
GREEN: camera is online and responding (but image might still be blocked by firewall settings)
• The status refreshes automatically every 30s. Click on Refresh status to update the camera list
manually.
• When right-clicking on a camera under the Camera List directory, following options are
available: