Velleman LPTDX1220 - Manual (Page 9)

LPTDX1220 GB 9
← : decrease one channel
→ : increase one channel
↑ : increase the preheating level
↓ : decrease the preheating level
SET : change to DIMMED/SWITCHED setting
CAN : cancels current operation and returns to the previous confirmed one
MODE : switch back to the last confirmed mode
FUN
: switch to different functions
Setting 2 : Dimmed / Switched
The display reads :
AL = all channels
01 – 12 = channels
d = dimmed
S = switched
- - = combination of “dimmed” and “switched” (only possible when the channels have been set
as “dimmed” or “switched”)
←
: decrease one channel
→ : increase one channel
↑ : change from dimmed to switched
↓ : change from switched to dimmed
SET : change to SCENE PROGRAMMING setting
CAN : cancels current operation and returns to the previous confirmed one
MODE : switch back to the last confirmed mode
FUN
: switch to different functions
SEL : memorise the setting
Setting 3 : Scene Programming
The display reads :
Six scenes can be stored in the memory.
Press ► : SC = 1 → SC = 2 → SC = 3 → SC = 4 → SC = 5 → SC = 6
Press ◄ : SC = 6 → SC = 5 → SC = 4 → SC = 3 → SC = 2 → SC = 1
Connect the LPTDX1220 with your dimming console (DMX/analogue) or use the self-test
function of the LPTDX1220. Subsequently, you should select SC=0 or SC=1 --- SC=6