Velleman LPTDX1220 - Manual (Page 8)

LPTDX1220 GB 8
tA = test all channels
01 – 12 = channels
.00 - .99 = level per channel
←
: decrease by one channel
→ : increase by one channel
↑ : increase the output level of a channel. Starts the test mode.
↓ : decrease the output level of a channel. Starts the test mode
SEL : the output level of all the channels will be set to the chosen value.
SET : switch to different settings
CAN : push once : resets all levels to zero
push twice : cancels current operation and returns to the previous confirmed mode.
MODE : switch back to the last confirmed mode
FUN
: switch to “automatic fader test”
Function 3 : AUTOMATIC FADER TEST
The display reads :
AF = automatic fader test
01 - 12 = channels
AL = all channels
←
: decrease the output level of a channel
→ : increase the output level of a channel
↑ : maintains the output level of the channel at 100% as long as the key is pressed
↓ : maintains the output level of the channel at 0% as long as the key is pressed
SEL : starts the test procedure
SET : switch to different settings
CAN : push once : resets all levels to zero
push twice : cancels current operation and returns to the previous confirmed mode.
MODE : switch back to the last confirmed mode
FUN
: switch to “monitor function”
Seven Different Settings
Setting 1 : Preheating
The display reads :
AL = all channels
01 – 12 = channels
0.0 – 6.0 = preheating level of the dimmer from 0-6%