Velleman CAMIP16 Quick Installation Guide - Manual (Page 5)

5
1. OVERVIEW
1.1 Product Features
 Easy network setup with your iPhone / iPad

1.3 / 2 Megapixel solution with HDTV 720p quality, allowing users to notice minor details more easily
 Solid light series featuring better overexposure prevention (Advanced Smart Light Control)
 ONVIF standard supported to simplify system integration
 POE (Power-over-Ethernet) support to eliminate the use of power cables and reduce installation costs
 External alarm I/O device connection
 IR LEDs built-in for night surveillance
 (For selected model only) Equipped with a vari-focal lens of f2.8 ~ 12mm, suitable for various monitoring environments.
 (For selected model only) WDR to increase image recognizability in overexposure and dark areas.
 (For selected model only) Zoom lens of f6.0 ~ 60mm with 10x optical zoom, 10x digital zoom and auto focus, suitable for
various monitoring environments.
 (For selected model only) Micro SD card support for video storage.
 (For selected model only) Built-in heater which can operate at temperatures as low as -40℃.
 Remote Surveillance
-- Fully compatibility on iPhone & iPad, and Internet Explorer® on Windows® operating system
1.2 Package Content
□ Network camera □ Desiccant □ Quick Setup
1.3 Cable Overview
Color Cable Description
-- Power cable
Connect to DC12V power supply.
Note: The power adapter is optional.
-- RJ45 network cable
Connect it to the supplied RJ45 cable extender adapter for cable extension, and prepare
another RJ45 network cable with suitable length for your connection.
Black & Brown GND Ground wire, used for reset default or external device connection.
Yellow Alarm-in
Reserved for connecting to an external alarm device. For details, please refer the user
manual of your alarm device.
Pink Alarm-out Reserved for connecting to an external alarm device. For details, please refer the user
manual of your alarm device.
Red RESET Remove the insulating coating of this wire, and twist it with a ground wire together to reset
default. This will reset all parameters, including the IP address to factory default settings.
Note: Disconnect power before twisting these two wires together, and connect to
power again for reset default.