Velleman CAMIP16 Quick Installation Guide - Manual (Page 10)

10
STEP2: Select the functions when needed:
FUNCTION ICON DESCRIPTION
Resolution -- Select the video resolution for the DPTZ function. Only “VGA” and “QVGA” are available.
Take snapshots
Click to take a snapshot of the current view on a new window. Right click on the picture and re-save it to the
location you want.
Alarm Out
Click to force your alarm-out device to work. For example, when your alarm device is a buzzer, click this button
and your buzzer will start to sound even if there’s no alarm event.
 Type B:
FUNCTION ICON DESCRIPTION
Moving panel --
When is selected, the moving control panel will be shown to move the picture after zoom-in is
performed.
Take snapshots
Click to take a snapshot of the current view on a new window. Right click on the picture and re-save
it to the location you want.
Fit to screen
The selected resolution is resized to fit into the current live view size.
This icon doesn’t work when the selected resolution is VGA or QVGA.
Zoom in / out
/
Click once to enlarge the picture by 1X, and click once to restore the zoom ratio by 1X.
Max. zoom in / out
/
Click once to enlarge the picture to the max zoom ratio by 16X, and click once to restore
the picture ratio to 1X.
Focus near / far
/
Click to adjust the clearness of the video images.
Focus Zone
Click to assign the point for focus adjustment.
This function will be disabled when DPTZ is enabled.