M-AUDIO Transit USB - Manual (Page 9)

17
E
N
G
L
I
S
H
16
E
N
G
L
I
S
H
Click Finish and your computer will reboot.
6. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system
tray. Connect the Transit USB to your computer’s USB port.Windows will display the
Found New Hardware dialog and will open the Windows Hardware Wizard. Choose the
default “Search for the best driver for your device” and click Next.
7. Windows will ask you for the location of the driver, uncheck all boxes except “Specify
Location” and click "Next".
to install Transit USB. Click Next to continue.
3. The installer will begin to copy the Transit USB files to your computer’s hard drive.
4. Once the driver files have successfully been installed, the CD Performance
Enhancements screen will appear. By default, the performance enhancement settings for
CD and DVD playback will be selected. It is recommended you leave them selected
unless you are certain that your hardware is incompatible with these settings.
5. After the driver files have been installed, you will be prompted to restart your computer.